Hinged & French Doors SovereignSeries™

SS Hinged Door Table

Colonial Glazing Bars     Passive Ventilation     Hardware     Jamb Liners     Flashings

Sizes

Maximum sizes for hinged doors vary by width, height, wind zone, and glazing requirement. Your local Bradnam's branch will be able to advise you whether a configuration is possible or contact Altus Technical Support.

As a guide hinged door window panels up to 2.2m by 0.9m are recommended. 


Frame Types

  • Open out hinged door frames feature a flush sill detail.
  • Hinged frames have optional facings ranging from 19mm, 25mm, 35mm cover, or no facing.
  • Provision of a 24mm glazing pocket.
  • An overlight and sidelight system is available in either integral transom/mullion design or by coupling of separate window units.


Glazing, Beads and Panel Types

  • A combination of rails and stiles can be used to provide for a wide range of glazing options, ranging from 4mm to 24mm and including square and sloped beads.
  • A sash adaptor and French door adaptor are available in the range.
  • All stiles can accommodate multi point locks.
  • Two variants of side light mullion or over light transom are available and are chosen based on span and wind load. Coupling bars are used for wider spans.
  • Vision rails are available to improve safety in high use areas.

 

Ventilation

Aluvent passive ventilation enables passive ventilation to be included into doors and fixed windows. Refer to Aluvent section

 

Flashings

A standard range of flashings include 95mm, 84mm,71mm, 68mm, 63mm, 58mm, 53mm, 48mm, 45mm, 41mm, 38mm, 31mm, 25mm and 14mm. These have been designed to comply with E2/AS1 Amendment 6 requirements. Refer to flashings section.

 

Hardware

Proprietary Altus NZ Limited Parliament hinges are used along with a variety of flush bolts and multi point lock options. Refer to hardware section.